VRChat

【無料】綿入れ半纏 しなの用 柄6種×6色【VRChat・Quest対応・MA対応】

しなの(Shinano ver1.02)に着せる、綿入れの半纏です。 無料です。 しなののセーターの代わりに着ます(メニューで半纏を出すと、セーターが消えます)。 綿が入ったふっくら厚い布に、太い衿。 前は開いたまま、みぞおちで紐を蝶結び。 袖口と裾から裏の布の色がのぞきます(ふき)。 前の下に貼りポケットが2つ。 袂は腕の動きに合わせて揺れます。 冬・こたつ・おうちの写真に。 柄は6種類×色6つ=36種、全部入りです。 ※しなの本体は入っていません。しなのは別に用意してください。 ■ 入っている物 ・柄6種×表の色6色=36種のプレハブ(PC・Quest それぞれ)  柄:蚊絣/井桁絣/霰絣/格子/亀甲/紬の無地  色:紺/えんじ/赤/黒/灰/茶 ・裏の布4色:赤・紺・山吹・黒(表の色に合わせて決めてあります。入れかえもできます) ・メニュー:半纏(Expression メニュー・初めはオン。オフでセーターが戻る) ・袂の揺れ(PhysBone 左右3本ずつ) ・色改変用の PSD・PNG:色ごとにレイヤー分け(地の色・柄の糸・糸の影)(別の zip) ■ 対応 ・しなの(Shinano ver1.02)専用です。他のアバターでは形が合いません。 ・PC:lilToon ・Quest / Android:専用のマテリアルとプレハブ入り ・Modular Avatar:プレハブをしなのの直下に入れるだけ ・メニューの「半纏」はワールドをまたいでも覚えています ・光ったり点滅したりはしません ■ 大きさ(しなのに着せた時) ・丈:太ももの中ほど ・袖:手首まで ■ 負荷の目安 ・ポリゴン(三角形):16,756(PC と Quest 同じ) ・マテリアル:2(表・裏) ・テクスチャ:色(JPG)・布の法線。512 のくり返し(Quest も 512) ・PhysBone:6(袂) ■ 入れ方(Modular Avatar) 1. tinkerleaf_Hanten_Shinano_v1.0.unitypackage を入れる。 2. Assets/Tinkerleaf/Wa21_Hanten/Prefabs/PC の好きな柄のプレハブ(TL_Hanten_Igeta_Enji など。Quest は Prefabs/Quest の _Quest)を、しなの(一番上)のすぐ下へドラッグ。 3. そのままアップロード。 ■ 使う人が先に入れておく物(同梱していません) ・しなの(Shinano ver1.02) ・VRChat SDK(Avatars) ・Modular Avatar ・lilToon(PC 版を使う時) ■ 動作確認 ・Unity 2022.3.22f1 ・VRChat SDK Avatars 3.10.6 ・Modular Avatar 1.18.7 ・lilToon 2.4.1 ・しなの ver1.02 ■ ファイル ・Tinkerleaf_Hanten_Shinano_v1.0.zip(必ず要る) ・Tinkerleaf_Hanten_Shinano_v1.0_FBX.zip(FBX とテクスチャ。Unity だけなら要りません) ・Tinkerleaf_Kaihen_Hanten_v1.0.zip(色改変用の PSD・PNG) ■ 更新 ・v1.0:初めの版。 ■ ご注意 ・無料ですが、配り直し・売ることはできません(利用規約の Terms_ja.txt を読んでください)。 ・しなの本体は入っていません。しなののメッシュやウェイトも入れていません。 ・このページの「しなの」は、着せられるアバターの名前として書いています。アバターの作者様とは関係のない、tinkerleaf が作った物です。 ■ tinkerleaf の他の物 ・脇差 鞘の塗り14種:https://tinkerleaf.booth.pm/items/9112852 ・蛇の目傘 和傘 柄14種:https://tinkerleaf.booth.pm/items/9111614 ・盃と酒瓢箪:https://tinkerleaf.booth.pm/items/9111004 ・頭に載る鏡餅 三方付き・なし(無料):https://tinkerleaf.booth.pm/items/9109062 ・破魔矢 絵馬3種:https://tinkerleaf.booth.pm/items/9109011 ・羽子板と羽根 絵3種:https://tinkerleaf.booth.pm/items/9108844 ・竹の手提灯 4色:https://tinkerleaf.booth.pm/items/9108427 ・和紙と漆の狐面(顔全部):https://tinkerleaf.booth.pm/items/9102798 ・太縁の丸メガネ 金箔散らし:https://tinkerleaf.booth.pm/items/9094199 ・大正の丸メガネ 玉飾りのチェーン付き:https://tinkerleaf.booth.pm/items/9093827 ・漆の狐面(無料):https://tinkerleaf.booth.pm/items/9089745 ・漆と蒔絵の指輪:https://tinkerleaf.booth.pm/items/9086491 ・つまみ細工のかんざし:https://tinkerleaf.booth.pm/items/9085893 ・銀杏のかんざし:https://tinkerleaf.booth.pm/items/9083656 ・水引の結び(無料):https://tinkerleaf.booth.pm/items/9085349 ―――――――――― Wata-ire Hanten (padded jacket) for Shinano – 6 patterns × 6 colors (free / PC / Quest, Modular Avatar) A padded Japanese jacket (wata-ire hanten) for Shinano (ver1.02). Free. It replaces Shinano's sweater (turn the hanten on in the menu and the sweater is hidden). Thick, puffy padded cloth with a wide collar. Worn open, tied with a bow at the chest. The lining color peeks out at the cuffs and the hem (fuki). Two patch pockets at the front. The sleeve bags sway with your arms. For winter, kotatsu and cozy at-home photos. - 6 patterns × 6 colors = 36 versions, all included: Kagasuri, Igeta-gasuri, Arare-gasuri, check, hexagon, plain tsumugi / navy, enji red, red, black, gray, brown - 4 lining colors (red, navy, yamabuki, black), matched to each color and swappable - Menu "半纏" (on by default; off brings the sweater back), saved across worlds - PhysBones on the sleeves (3 per side). Nothing glows or flashes. - PC: lilToon / Quest & Android: prefabs with their own materials - Modular Avatar: drop the prefab directly under Shinano - Layered PSD / PNG for recoloring (ground color, pattern threads, thread shading), in a separate zip Shinano itself is NOT included. Shinano only; it does not fit other avatars. Performance: 16,756 tris (PC and Quest); materials: 2; PhysBones: 6. Files: main (unitypackage, required), FBX (FBX and textures for other software), Kaihen (recolor PSD / PNG). Required (not included): Shinano ver1.02, VRChat SDK (Avatars), Modular Avatar, lilToon (for PC). Tested with Unity 2022.3.22f1, VRChat SDK 3.10.6, Modular Avatar 1.18.7, lilToon 2.4.1. No Shinano mesh or weights are included. This is an independent item by tinkerleaf, not affiliated with the avatar's creator. Free, but redistribution and resale are not allowed. Please read Terms_en.txt.

利用規約

更新履歴

【無料】綿入れ半纏 しなの用 柄6種×6色【VRChat・Quest対応・MA対応】
【無料】綿入れ半纏 しなの用 柄6種×6色【VRChat・Quest対応・MA対応】
【無料】綿入れ半纏 しなの用 柄6種×6色【VRChat・Quest対応・MA対応】
【無料】綿入れ半纏 しなの用 柄6種×6色【VRChat・Quest対応・MA対応】
【無料】綿入れ半纏 しなの用 柄6種×6色【VRChat・Quest対応・MA対応】
しなの(Shinano ver1.02)に着せる、綿入れの半纏です。 無料です。 しなののセーターの代わりに着ます(メニューで半纏を出すと、セーターが消えます)。 綿が入ったふっくら厚い布に、太い衿。 前は開いたまま、みぞおちで紐を蝶結び。 袖口と裾から裏の布の色がのぞきます(ふき)。 前の下に貼りポケットが2つ。 袂は腕の動きに合わせて揺れます。 冬・こたつ・おうちの写真に。 柄は6種類×色6つ=36種、全部入りです。 ※しなの本体は入っていません。しなのは別に用意してください。 ■ 入っている物 ・柄6種×表の色6色=36種のプレハブ(PC・Quest それぞれ)  柄:蚊絣/井桁絣/霰絣/格子/亀甲/紬の無地  色:紺/えんじ/赤/黒/灰/茶 ・裏の布4色:赤・紺・山吹・黒(表の色に合わせて決めてあります。入れかえもできます) ・メニュー:半纏(Expression メニュー・初めはオン。オフでセーターが戻る) ・袂の揺れ(PhysBone 左右3本ずつ) ・色改変用の PSD・PNG:色ごとにレイヤー分け(地の色・柄の糸・糸の影)(別の zip) ■ 対応 ・しなの(Shinano ver1.02)専用です。他のアバターでは形が合いません。 ・PC:lilToon ・Quest / Android:専用のマテリアルとプレハブ入り ・Modular Avatar:プレハブをしなのの直下に入れるだけ ・メニューの「半纏」はワールドをまたいでも覚えています ・光ったり点滅したりはしません ■ 大きさ(しなのに着せた時) ・丈:太ももの中ほど ・袖:手首まで ■ 負荷の目安 ・ポリゴン(三角形):16,756(PC と Quest 同じ) ・マテリアル:2(表・裏) ・テクスチャ:色(JPG)・布の法線。512 のくり返し(Quest も 512) ・PhysBone:6(袂) ■ 入れ方(Modular Avatar) 1. tinkerleaf_Hanten_Shinano_v1.0.unitypackage を入れる。 2. Assets/Tinkerleaf/Wa21_Hanten/Prefabs/PC の好きな柄のプレハブ(TL_Hanten_Igeta_Enji など。Quest は Prefabs/Quest の _Quest)を、しなの(一番上)のすぐ下へドラッグ。 3. そのままアップロード。 ■ 使う人が先に入れておく物(同梱していません) ・しなの(Shinano ver1.02) ・VRChat SDK(Avatars) ・Modular Avatar ・lilToon(PC 版を使う時) ■ 動作確認 ・Unity 2022.3.22f1 ・VRChat SDK Avatars 3.10.6 ・Modular Avatar 1.18.7 ・lilToon 2.4.1 ・しなの ver1.02 ■ ファイル ・Tinkerleaf_Hanten_Shinano_v1.0.zip(必ず要る) ・Tinkerleaf_Hanten_Shinano_v1.0_FBX.zip(FBX とテクスチャ。Unity だけなら要りません) ・Tinkerleaf_Kaihen_Hanten_v1.0.zip(色改変用の PSD・PNG) ■ 更新 ・v1.0:初めの版。 ■ ご注意 ・無料ですが、配り直し・売ることはできません(利用規約の Terms_ja.txt を読んでください)。 ・しなの本体は入っていません。しなののメッシュやウェイトも入れていません。 ・このページの「しなの」は、着せられるアバターの名前として書いています。アバターの作者様とは関係のない、tinkerleaf が作った物です。 ■ tinkerleaf の他の物 ・脇差 鞘の塗り14種:https://tinkerleaf.booth.pm/items/9112852 ・蛇の目傘 和傘 柄14種:https://tinkerleaf.booth.pm/items/9111614 ・盃と酒瓢箪:https://tinkerleaf.booth.pm/items/9111004 ・頭に載る鏡餅 三方付き・なし(無料):https://tinkerleaf.booth.pm/items/9109062 ・破魔矢 絵馬3種:https://tinkerleaf.booth.pm/items/9109011 ・羽子板と羽根 絵3種:https://tinkerleaf.booth.pm/items/9108844 ・竹の手提灯 4色:https://tinkerleaf.booth.pm/items/9108427 ・和紙と漆の狐面(顔全部):https://tinkerleaf.booth.pm/items/9102798 ・太縁の丸メガネ 金箔散らし:https://tinkerleaf.booth.pm/items/9094199 ・大正の丸メガネ 玉飾りのチェーン付き:https://tinkerleaf.booth.pm/items/9093827 ・漆の狐面(無料):https://tinkerleaf.booth.pm/items/9089745 ・漆と蒔絵の指輪:https://tinkerleaf.booth.pm/items/9086491 ・つまみ細工のかんざし:https://tinkerleaf.booth.pm/items/9085893 ・銀杏のかんざし:https://tinkerleaf.booth.pm/items/9083656 ・水引の結び(無料):https://tinkerleaf.booth.pm/items/9085349 ―――――――――― Wata-ire Hanten (padded jacket) for Shinano – 6 patterns × 6 colors (free / PC / Quest, Modular Avatar) A padded Japanese jacket (wata-ire hanten) for Shinano (ver1.02). Free. It replaces Shinano's sweater (turn the hanten on in the menu and the sweater is hidden). Thick, puffy padded cloth with a wide collar. Worn open, tied with a bow at the chest. The lining color peeks out at the cuffs and the hem (fuki). Two patch pockets at the front. The sleeve bags sway with your arms. For winter, kotatsu and cozy at-home photos. - 6 patterns × 6 colors = 36 versions, all included: Kagasuri, Igeta-gasuri, Arare-gasuri, check, hexagon, plain tsumugi / navy, enji red, red, black, gray, brown - 4 lining colors (red, navy, yamabuki, black), matched to each color and swappable - Menu "半纏" (on by default; off brings the sweater back), saved across worlds - PhysBones on the sleeves (3 per side). Nothing glows or flashes. - PC: lilToon / Quest & Android: prefabs with their own materials - Modular Avatar: drop the prefab directly under Shinano - Layered PSD / PNG for recoloring (ground color, pattern threads, thread shading), in a separate zip Shinano itself is NOT included. Shinano only; it does not fit other avatars. Performance: 16,756 tris (PC and Quest); materials: 2; PhysBones: 6. Files: main (unitypackage, required), FBX (FBX and textures for other software), Kaihen (recolor PSD / PNG). Required (not included): Shinano ver1.02, VRChat SDK (Avatars), Modular Avatar, lilToon (for PC). Tested with Unity 2022.3.22f1, VRChat SDK 3.10.6, Modular Avatar 1.18.7, lilToon 2.4.1. No Shinano mesh or weights are included. This is an independent item by tinkerleaf, not affiliated with the avatar's creator. Free, but redistribution and resale are not allowed. Please read Terms_en.txt.